ABB OmniCore C30 Operating Manual Download Page 213

Page: 213 / 236

8.5 I/O devices

Managing I/O devices

You can manage I/O devices from the

I/O Devices

page. To manage an I/O device,

use the context menu that is displayed for the devices.

xx1800001859

Following are the actions that you can perform using the context sensitive menu:

Output

Action

Activates or deactivates the selected I/O device.

Activate

Deactivate

Displays the input and output bit values of the selected I/O
device.

Bit Values

Displays the signals associated with the selected I/O device.

Signals

Displays the MAC ID of the selected I/O device.

Note

Actions - Identify

option is available only for the network type

EtherNet IP.

Actions

Allows you to configure the selected I/O device.

Note

The

Configure

option is available only for the network type

EtherNet IP.

Configure

Allows you to upgrade the firmware.

Note

Actions - Firmware

option is available only for the network type

EtherNet IP.

Firmware Update

Continues on next page

Operating manual - OmniCore

213

3HAC065036-001 Revision: E

8 Handling inputs and outputs, I/O

8.5 I/O devices

Summary of Contents for OmniCore C30












































































































































































































































Search results

Summary of Contents for OmniCore C30

Reviews:

ABB OmniCore C30, Operating Manual, Page: 213 / 236

Search results

Summary of Contents for OmniCore C30

Reviews: