ABB OmniCore C30 Operating Manual Download Page 229

Page: 229 / 236

10.9 Connection log

Overview

This option is used to save the current connection state of the connectivity module.

Note

Connection log is available only for Connected Services Gateway 3G and Wi-Fi
but not for Wired.

Procedure

Use the following procedure to save the current connection state of the connectivity
module:

1 On the start screen, tap

Settings

, and then

Backup & Recovery

2 On the left sidebar tap

Connection log

The

Connection log

page is displayed and the logs are displayed on a

window.

Note

Tap on the refresh button to update the logs.

3 Tap

Export

4 If required, in the

File Name

field edit the name of the file.

5 If required, to change the storage path, in the

Folder Name

field tap

Browse

and select the required path.

6 Tap

Create

The current connection state of the connectivity module is saved in the
selected path.

Operating manual - OmniCore

229

3HAC065036-001 Revision: E

10 Install, update, restart, and other configuration

10.9 Connection log

Summary of Contents for OmniCore C30












































































































































































































































Search results

Summary of Contents for OmniCore C30

Reviews:

ABB OmniCore C30, Operating Manual, Page: 229 / 236

Search results

Summary of Contents for OmniCore C30

Reviews: