ABB OmniCore C30 Operating Manual Download Page 100

Page: 100 / 236

3 Tap

Change declaration

on the

Context menu

for the routine.

xx1900000271

The

Change Declaration

page is displayed.

4 If no parameters are shown, tap the

Edit

button next to the

Parameters

field.

The

Edit Routine Parameters

page is displayed.

xx1900000272

5 Tap

Add Parameter

and select

Mandatory Parameter

Optional Parameter

according to your requirement.

The selected parameter is added to the

Edit Routine Parameters

list.

Note

Select an optional parameter and tap

Add Parameter

Optional Mutual

Parameter

to add a parameter that is mutually optional with another

parameter.

Read more about routine parameters in the RAPID reference manuals.

6 Type a

Name

for the parameter and tap

Apply

7 The new parameter is displayed in the list. Tap to select a parameter. To edit

values, tap the value.

8 Tap

Apply

The selected parameters are added to the

Parameters

field in the routine

declaration window.

Continues on next page

100

Operating manual - OmniCore

3HAC065036-001 Revision: E

6 Programming and testing

6.3.3 Handling of routines

Continued

Summary of Contents for OmniCore C30












































































































































































































































Search results

Summary of Contents for OmniCore C30

Reviews:

ABB OmniCore C30, Operating Manual, Page: 100 / 236

Search results

Summary of Contents for OmniCore C30

Reviews: