2TLC172315M0201, rev K
4
www.abb.com/jokabsafety
Monday, May 07, 2018 10:51:13 AM
1 Introduction
Scope
These user instructions are intended to describe the Magne electromagnetic process lock and to provide necessary
information required for assembly, installation, checking and adjusting after installation and maintenance. These
instructions contain basic information needed for the electrical installation of Magne.
Dear reader,
This document is intended for authorized installation personnel.
Prior knowledge
It is assumed that the reader of this document has knowledge of the following:
Basic knowledge of products from ABB Jokab Safety.
General knowledge about safety devices and process locks.
General knowledge of equipment safety
Specific comments
Please pay attention to the following specific comments throughout the entire document:
Warning
Risk of serious personal injury
An instruction, directive or procedure that, if not performed correctly, can cause injuries to
operators or other personnel.
Caution
Risk of damage to the equipment.
An instruction, directive or procedure that, if not performed correctly, can lead to damage to the
equipment.
Important
! Comments that are made to provide important or explanatory information.
