ABB JDF200, Operating Instruction

Page: 14 / 36

14 OI/JDF200-EN Rev. E | 2600T Series
7 Operation
This menu allows the verification and the parameterization of
the basic configuration of the JDF200 field indicator. The menu
driven structure will guide you to the choice of the interface
language, the tag number configuration, the decimal point
position, the process variable to be shown and the relevant
settings (engineering unit, zero point, full scale and linearization
type if flow variables are selected).
This menu allows the set-up of different functions relevant to
the display itself. The menu-driven structure will guide you
through the choice of some functional aspects as the display
language and contrast. Moreover, it is possible to choose in
details what you want to see on the display: one or two lines
with bargraph. Display scaling (high and low trimming) can be
performed accessing a dedicated section of this sub-menu.
This menu allows the visualization of the serial number of
JDF200, its hardware and software revisions. Tag number
setting is available.
Inside this menu there is the possibility of enabling and setting
a password for security reasons.
This menu allows the parameterization of the process alarm.
The menu-driven structure will guide you through the setting of
saturation and alarm limits as well as the customization of
alarm messages.
This menu allows you to monitor diagnostics messages
counters related to signal alarms or saturations.
Service menu is to be used by ABB personnel only and allows
JDF200 detailed configuration visualization.