10 OI/JDF200-EN Rev. E
| 2600T Series
5 Mounting
6.5.1 5.4.1 Bracket mounting
Mounting bracket is available as standard please refer to the relevant installation drawing below in mm (inch.):
130 (5.12)
100 (3.93)
121 (4.76)
107 (4.21)
107 (4.21)
26 (1.02)
55 (2.17)
31 (1.22)
91 (3.58)
120 (4.72)
54 (2.13)
54 (2.13)
Figure 3: JDF200 field indicator installed on a horizontal or vertical pipe with optional bracket
Figure 4: Pipe and wall mounting bracket kit (B2)
6.5.2 5.4.2 BB Stainless steel U-bolt for pipe fixing
The U-bolt and nuts supplied are necessary for the installation
on pipe. In case of panel or wall installation, the U-bolt and the
U-bolt nuts and washers will not have to be used.
The bolts for panel mounting are not within the scope of
supply.
6.6 5.5 Securing the housing cover in flameproof
areas
The front face of the field indicator housing features a locking
screw (hex-head socket screw) on the top right-end corner
(see picture 5).
— Install the cover on the housing by hand- tightening it.
— Turn the locking screw counterclockwise to secure the
housing cover. This involves unscrewing the screw until
Figure 5: Housing cover locking screws
Summary of Contents for JDF200
