ABB JDF200, Operating Instruction

Page: 13 / 36

2600T Series | OI/JDF200-EN Rev. E 13
7 Operation
8 7 Operation
8.1 7.1 Configuration of the field indicator using the
optional integral LCD with keypad (menu-controlled)
The integral LCD is connected on the field indicator electronic
board. It can be used to visualize the process measured
variables as well as to configure the display.
In addition, diagnostic information is provided. To access the
functionality of the LCD an activation procedure needs to be
carried out. The keypad activation procedure is the same for
the TTG (Trough The Glass) version and the conventional LCD.
Figure 8: Display keypad
The keys (1) , (4) , (2) and (3) are available for the
menu-controlled configuration.
— The menu / submenu name is displayed above in the LCD
display.
— The number/line of the currently selected menu item is
displayed in the upper right of the LCD display.
— A scroll bar is located on the right edge of the LCD
display which shows the relative position of the currently
selected menu item within the menu.
— Both of the keys (1) and (4) can have various
functions.
The meaning of these buttons is displayed below in the
LCD display above the respective button.
— You can browse through the menu or select a number
within a parameter value using both keys (2)
and (3) . The button (4) selects the desired menu
item.
Button (1) functionalities Meaning
Exit Exit menu
Back Back one submenu
Cancel
Exit without saving the selected parameter
value
Next
Select next position for entering numerical val-
ues or letters
Button (4) functionalities Meaning
Select Select submenu/parameter
Edit Edit parameter
Ok
Save selected parameter and display stored
parameter value
8.2 7.2 Conventional LCD (L1 option)
Gain access to the display by unscrewing the windowed cover.
Please observe the Hazardous area prescription before
proceeding with the cover removal. For activation, see
instructions below.
8.3 7.3 LCD menu structure
The LCD menu is divided in the following sections which can
be selected by acting on the keys (2)
and (3) , once on
the display the desired sub-menu icon will be visualized,
confirm your selection with the [SELECT] key (4)
.
Follow the instruction on the screen to perform the
configuration of the different parameters.