Note
Action
Use standard tools.
Loosen the plastic nut and re-
move the push button from the
transmission cover.
3
Refitting
Note
Action
A
xx0700000651
Refit the push button to the
transmission cover using the
plastic nut
.
Note
Mount the button cover or the
robot will not fulfill the IP67
and IP69K classification.
1
xx0800000011
Press to refit the contact.
2
Tip
Refit the cables to the contact before this step.
Replacement of base cover gasket on page 167
CAUTION
The base cover has sharp edges, use protective gloves.
Refit the base cover.
3
Product manual - IRB 360
235
3HAC030005-001 Revision: U
© Copyright 2008-2018 ABB. All rights reserved.
4 Repair
4.5.2 Replacement of brake release button
Continued
Summary of Contents for IRB 360 Series
