ABB i-bus KNX SUG/U 1.1, Product Manual, Page: 43 / 56

ABB i-bus
®
KNX
Commissioning
SUG/U 1.1 | 2CDC508171D0201 41
No. Function Group object name Data type Flags
16 Status Forced operation Function 1 bit
DPT 1.003
C, R, T
Dependent on parameters Enable "Forced operation" function and
Enable group object "Status Forced operation" 1-bit
This object indicates the status of Forced operation.
1 = Forced operation is activated
0 = Forced operation is deactivated
17 Window contact Function 1 bit
DPT 1.019
C, W
Dependent on parameter Enable "Window contact" function
When a telegram with the value 1 is received on this object, the split unit switches off.
No switching off delay can be parametrized.
On receipt of a telegram with the value 0, the unit is restored to the state it was in before being switched off.
18 Status Window contact Function 1 bit
DPT 1.019
C, R, T
Dependent on parameters Enable "Window contact" function and
Enable group object "Status Window contact" 1 bit
This object indicates the status of the Window contact function.
1 = Window contact function is activated
0 = Window contact function is deactivated
19 Presence Function 1 bit
DPT 1.018
C, W
Dependent on parameter Enable "Presence" function
Activating the Presence function (sending a telegram with the value 1 on the object) sets the split unit to its parametrized state
for Presence = 1.
After the (optional) parametrizable monitoring time or on deactivating the Presence function (sending a telegram with the value
0 on the object) the split unit is set to its parametrized state for Presence = 0.
20 Status Presence Function 1 bit
DPT 1.018
C, R, T
Dependent on parameters Enable "Presence" function and
Enable group object "Status Presence" 1 bit
The value of this group object indicates the state of the Presence object.