ABB -i-Bus-KNX Millenium Reference Manual Download Page 30 | Manualshive

Page: 30 / 103

background image

KNX Technical Reference Manual

ABB-i-Bus

®

-KNX Millenium

Description of applications /

objects

KNX Technical Reference Manual | 1473-1-8681

— 30 —

Variante:Power-Tool

Pos: 31.1 /Layout bis 2014-11-11/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Applikations- / Objektbeschreibungen @ 31\mod_1349426142748_15.docx @ 241751 @ 1 @ 1

11

Description of applications / objects

Pos: 31.2 /Layout bis 2014-11-11/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/A - F/Anwendungs (Applikations-) programm @ 41\mod_1421851906124_15.docx @ 314749 @ 2 @ 1

11.1

Application program

Pos: 31.3 /Layout bis 2014-11-11/Online-Dokumentation (+KNX)/Applikations- / Objektbeschreibungen/KNX/KNX-Sensorik/Millenium/6124 - Raumtemperaturregler/Übersicht der Apllikationsprogramme @ 41\mod_1422458362709_15.docx @ 329665 @ @ 1

The following applications program is available:

Application program

Continuous / switching heating cooling TP/7

Pos: 31.4 /Layout bis 2014-11-11/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/A - F/Anwendungs (Applikations-) programm @ 41\mod_1421851906124_15.docx @ 314749 @ 2 @ 1

11.2

Application program

Pos: 31.5 /Layout bis 2014-11-11/Online-Dokumentation (+KNX)/Applikations- / Objektbeschreibungen/KNX/KNX-Sensorik/Millenium/6124 - Raumtemperaturregler/Übersicht der Applikationen @ 41\mod_1421851680281_15.docx @ 314733 @ @ 1

The application program for the room temperature controller contains the applications listed in the following:

KNX application

RTC settings

Control settings

Button top right

General functions

Depending on which device and application are selected, the Engineering Tool Software "ETS" shows different
parameters and communication objects. This allows the control element to be set accordingly with multi functions.

Pos: 31.6 /Layout bis 2014-11-11/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenu+++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1

«
...
28
29
30
31
32
...
»

Summary of Contents for -i-Bus-KNX Millenium








































































































Reviews:

No comments

Related manuals for -i-Bus-KNX Millenium

Brand: ICP DAS USA Pages: 166

Brand: ICP DAS USA Pages: 64

Tunnel Master Jr

Brand: ICS Pages: 83

Brand: Guangdong Schen Investment Pages: 15

Brand: CLS Pages: 6

Keyboard Controller Series

Brand: M-Audio Pages: 2

Brand: Suzhou Lily Pages: 8

Brand: HARRICK Pages: 22

Brand: Optelec Pages: 41

Modular E70 Series

Brand: Coremorrow Pages: 14

Brand: ZALMAN Pages: 8

Brand: NI Pages: 18

Brand: Sensor Access Pages: 11

Brand: Sutron Pages: 201

Brand: RollSeal Pages: 58

Brand: Warner Electric Pages: 16

Pentek Solar Drive PSD30

Brand: Pentair Pages: 52

TEMP2020 series

Brand: Samwontech Pages: 75

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands