KNX Technical Reference Manual
ABB-i-Bus
®
-KNX Millenium
Description of applications /
objects
KNX Technical Reference Manual | 1473-1-8681
— 57 —
Pos: 31.7.96 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Objekt-RTR/Module/Sollwerteinstellungen — Anhebung Eco Kühlen (°C) @ 40\mod_1421742457725_15.docx @ 313604 @ 3 @ 1
11.3.77
Setpoint settings - Increase for ECO cooling (°C)
Options:
Setting option between 0 - 15
Specifies the temperature in cooling mode when nobody is present. On devices with a display,
this mode is indicated by the eco icon.
Note
This parameter is only available when the "Control function" parameter is set on
"Cooling", "Cooling with additional stage", "Heating and cooling" or "Heating and
cooling with additional stages".
Pos: 31.7.97 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Objekt-RTR/Module/Sollwerteinstellungen — Solltemperatur Hitzeschutz (°C) @ 40\mod_1421742545048_15.docx @ 313619 @ 3 @ 1
11.3.78
Setpoint settings - Set-point temperature for heat protection (°C)
Options:
Setting option between 27 - 45
Function for protecting the building against heat. On devices with a display, this mode is
indicated by the heat protection icon. Manual operation is blocked.
Note
This parameter is only available when the "Control function" parameter is set on
"Cooling", "Cooling with additional stage", "Heating and cooling" or "Heating and
cooling with additional stages".
Pos: 31.7.98 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Objekt-RTR/Module/Sollwerteinstellungen — Displayanzeige zeigt @ 40\mod_1421742653583_15.docx @ 313634 @ 3 @ 1
11.3.79
Setpoint settings - Display indicates
Options:
Current setpoint
Relative setpoint
The display can indicate either the absolute or relative setpoint value.
–
Current setpoint
: On devices with a display, the setpoint is shown as an absolute
temperature, e.g. 21.0°C.
–
Relative setpoint
: On devices with display, the setpoint is indicated as a relative value, e.g. -
5°C .. + 5°C.
Pos: 31.7.99 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Objekt-RTR/Module/Sollwerteinstellungen — Displayanzeige zeigt @ 40\mod_1421742653583_15.docx @ 313634 @ 3 @ 1
11.3.80
Setpoint settings - Display indicates
Options:
Current setpoint
Relative setpoint
The display can indicate either the absolute or relative setpoint value.
–
Current setpoint
: On devices with a display, the setpoint is shown as an absolute
temperature, e.g. 21.0°C.
–
Relative setpoint
: On devices with display, the setpoint is indicated as a relative value, e.g. -
5°C .. + 5°C.
Pos: 31.7.100 /System+++++++++++++ Seitenu++++++++++++++ @ 41\mod_1422789416992_0.docx @ 333487 @ @ 1
