ABB i-bus
®
KNX
Function
16 9AKK108467A5941 Rev. B | MG/S 11.100.1.1 | EN | Product Manual
Note about navigation in the PDF: Key combination
'Alt + left arrow' jumps to the previous view/page
4.2.1
Device Configuration App (DCA)
For easy configuration, the DCA "MG/S 11.100.1.1 Template Configuration" is recommended. With this
DCA, the mapping of the Modbus KNX data points of a server can be exported as a reusable template.
The DCA can also be used to import ready-made device templates from a database.
The DCA "ABB MG/S11.100.1.1 Template Configuration" is available for download from the
Note
The DCA is a device-specific app and is not available for demo versions of ETS.
Note
For information on how to activate the DCA, see the
for ETS Version 5 and the
for ETS Version 6.
4.3
Special operating states
The device's reaction if there is a bus voltage failure, after bus voltage recovery and after ETS download is
predetermined by the gateway and cannot be parameterized.
4.3.1
Reaction on bus voltage failure
Bus voltage failure describes the failure of the bus voltage, e.g. due to a power failure.
The device is powered via the bus (ABB i-bus
®
KNX). A bus voltage failure may switch off the device or
prevent it from working correctly.
Note
The front of the gateway features two LEDs that indicate its local operating state. See
