ABB i-bus
®
KNX
Parameters
44 9AKK108467A5941 Rev. B | MG/S 11.100.1.1 | EN | Product Manual
Note about navigation in the PDF: Key combination
'Alt + left arrow' jumps to the previous view/page
7.2.2.4
Device x Active
This parameter is used to define whether the device is activated.
If the device is deactivated, all of its data points are automatically deactivated.
Deactivated data points are taken into account in the
Total Gateway Data Points
parameter.
Option
No
The device is deactivated.
Yes
The device is activated.
Note
This parameter appears in two places:
•
The
General
parameter window
•
The device parameter window
Changing it in one parameter window also changes it in the other.
Example
You can use this parameter to preconfigure a server but not activate it until it is connected to the
gateway.
Prerequisites for visibility
•
This parameter is in the
Config Device x
parameter window.
