ABB i-bus KNX ABA/S 1.2.1, Product Manual

Page: 9 / 116

ABB i-bus
®
KNX
Safety
ABA/S 1.2.1 | 2CDC509086D0201 9
2 Safety
2.1 General safety instructions
►
Protect the device from moisture, dirt and damage during transport, storage and operation.
►
Operate the device only within the specified technical data.
►
Operate the device only in a closed housing (distribution board).
►
Mounting and installation must be carried out by qualified electricians.
►
Switch off the device supply voltage before mounting.
2.2 Proper use
The product must be installed centrally in an electrical distribution board.
The device is a modular installation device for quick installation in distribution boards on 35 mm mounting
rails to EN 60715.
2.3 Cyber security (network security)
The industry is increasingly faced with cyber security risks. To make its solutions more stable, secure and
robust, ABB has officially added cyber security tests to its product development process.
In addition, the information below includes guidelines and mechanisms that you can use to improve the
security of KNX systems.
Link to disclaimer, "Cyber Security Disclaimer for Products"
2.4 Restrict access to the various media
The basis of any protection plan is to isolate the system carefully against unauthorized access. Only
authorized persons (installers, janitors and users) should have physical access to a KNX system. During
planning and installation, the critical points of each KNX medium must be protected as effectively as
possible.
In general, applications and devices should be permanently installed to prevent them from being easily
removed, allowing unauthorized access to the KNX system. Sub-distributions with KNX devices should be
closed, or in rooms to which only authorized persons have access.