Commissioning
Operating Instructions 2TMD041700D0041
│
22
8.1.7
Door
entry
setting
Fig. 17: Door entry setting
Press the
function button of the indoor station to open the "Basic setting" interface.
On the list on the left side, select "Door entry", and then click "Select" to enter the setting
interface.
It is possible to activate the automatic snapshots function of the indoor station by clicking
"Automatic Snapshots". (Enabled by default)
It is possible to activate the absence message function by checking "Absence Msg for Visitor".
(Can be enabled once absence message information has been set)
It is possible to activate the automatic unlock function by checking "Doormatic". (Once this
function has been enabled, when the indoor station has been called, it will unlock automatically
after 5 s if there is no response. This is not enabled by default).
Click "Change Unlock PWD " to change the unlock password. (The system default password is
123456. This password is only to be used for the initial setting, and it should then be changed to
another password. It cannot serve as the real unlock password)
Click " Private OS ", enter the private password in the pop-up window (the system default is
123456) and enter the outdoor station settings. (This can be applied to the mini outdoor station
and villa outdoor station)
