ABB H82351 Series Operating Instructions Manual Download Page 17

Page: 17 / 78

Commissioning

Operating Instructions 2TMD041700D0041

│

8.1.2 Sound

setting

Fig. 12: Sound setting

■

Press the

function button of the indoor station to open the "Basic setting" interface.

■

On the list on the left side, select "Sound", and then click "Select" to enter the setting
interface.

On the sound settings page, it is possible to customize the ringtones of calls from different
devices. For example, an outdoor station, guard unit or other devices.

The system has five ringtones to choose from. Click "Select Ringtone" to select a ringtone from
the SD card. (Only mp3 and wav formats are supported)

It is recommended that the ringtone file is placed in the SD card’s

media

directory.

Click “OK” to save the settings.

Summary of Contents for H82351 Series















































































Search results

Summary of Contents for H82351 Series

Reviews:

Related manuals for H82351 Series

Brands by name

Popular brands

ABB H82351 Series, Operating Instructions Manual

Search results

Summary of Contents for H82351 Series

Reviews:

Related manuals for H82351 Series

Brands by name

Popular brands