Product description
Operating Instructions 2TMD041700D0041
│
11
Note
– Any of the eight zones can be connected as one of the above four ways,
according to the actual situation.
– For the connection of the same type of zones, please according to
"Connection of multiple detectors"
– The unused zone interfaces should be closed in the "Set alarm zone
attribute" or the interfaces should be ground shielded with a 10 K resistor.
– It needs to be set in the zone property after the connection is finished.
– You can use "Start test mode" to detect whether the zone is working
properly. For details, please refer to the chapter "Set alarm zone attribute".
