USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
28
3
Initialize and Run the Analyzer
To initialize the analyzer:
1.
Press the power switch on the front of the analyzer to the ON position. (0 = OFF / - =
ON)
The internal computer initializes, and a screen (Figure 14) displays as the program
loads.
The
Launch Service screen displays after initialization. (Figure 16)
2.
Click on the launch button button to manually launch the analyzer.
a. The launch button is the abbreviated name of the gas analyzer. For example,
the GLA451-OCS button displays OCS. (Figure 16)
b. If you don’t make a selection within 120-seconds, the analyzer automatically
defaults to the
Main Panel Numeric display. (Figure 20)
3. Click on the maintenance SERVICE button (Figure 16) if you need more time or need to
choose a maintenance setting. (Figure 17)
Once a month, the analyzer automatically performs a thorough file
system integrity check during startup. This maintenance takes
approximately one to two minutes before it continues to load the
software.
Do not turn off the computer during the monthly maintenance!
Figure 14: Start up Screen in Busy Mode
