USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
108
b. Disable the
Water Vapor Isotope Standard Source (WVISS) if your analyzer is
configured with this optional accessory. To disable the WVISS:
i.
Click Setup on the
User Interface Control Bar. (Figure 105)
Figure 105: Setup button on the User Interface Control Bar
ii.
Click on the WVISS tab at the top of the
Setup screen. (Figure 106)
iii.
Select Single Stage WVISS Disabled in the drop down menu in the
WVISS mode section. (Figure 106)
iv.
Click Save Changes. (Figure 106)
v.
Click Close to exit the
Setup menu. (Figure 106)
Figure 106: Control Menu for the (Optional) WVISS
