Safety
14 FSM4000
D184B140U02
Pos: 6.27 /Sicherheit/Allgemein/Organisatorische Maßnahmen/Entsorgung @ 10\mod_1176447410937_3101.doc @ 81544
1.11 Disposal
ABB Automation Products GmbH actively promotes environmental consciousness and has an
operational management system in accordance with DIN EN ISO 9001:2000, EN ISO
14001:2004 and OHSAS 18001. Our products and solutions should have minimum impact on
the environment and persons during manufacture, storage, transport, use and disposal.
This includes the environmentally friendly use of natural resources. Through its publications
ABB conducts an open dialog with the public.
This product/solution is manufactured from materials that can be reused by specialized
recycling companies.
1.11.1 Information on WEEE directive 2002/96/EC (Waste Electrical and Electronic Equipment)
This product/solution is not subject to the WEEE directive 2002/96/EC and relevant national
laws (e.g., ElektroG in Germany).
Dispose of the product/solution directly in a specialized recycling facility and do not use the
municipal garbage. Only privately used products may be disposed of in the municipal garbage
according to the WEEE directive 2002/96/EC. Proper disposal prevents negative effects on
people and the environment, and supports the reuse of valuable raw materials.
If it is not possible to dispose of old equipment properly, ABB Service can accept and dispose of
returns for a fee.
Pos: 6.28 /Sicherheit/Durchfluss/Allgemein/Sicherheitshinweise zum Transport (Durchfluss) @ 0\mod_1129731815740_3101.doc @ 3265
1.12 Transport safety information
Observe the following information:
•
Depending on the device, the center of gravity may not be in the center of the equipment.
•
The protective plates or dust caps mounted at the process connections of devices equipped
with PTFE/PFA may only be removed before installation.
To prevent possible leakage, make sure that the liner on the flange is not cut or damaged.
Pos: 6.29 /Überschriften/1.1/1-spaltig/S - U/Sicherheitshinweise zur Montage @ 0\mod_1140166528109_3101.doc @ 3208
1.13 Installation safety information
Pos: 6.30 /Sicherheit/Durchfluss/Allgemein/Sicherheitshinweise zur Montage (Durchfluss) @ 0\mod_1129733378667_3101.doc @ 3270
Observe the following instructions:
•
The flow direction must correspond to the direction indicated on the device, if labeled.
•
Comply with the maximum torque for all flange bolts.
•
Install the devices without mechanical tension (torsion, bending).
•
Install flange and wafer type units with coplanar counter flanges.
•
Only install devices for the intended operating conditions and with suitable seals.
•
Secure the flange bolts and nuts against pipeline vibrations.
Pos: 6.31 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
