48
ABB i-bus
®
EIB / KNX
Differential value for sending the control value
Options [min.]: – 2...255
(3)
Setting the differential value at which the control value is sent in addition to
the cyclical sending. This parameter is only visible if the option “EIB valve,
continuous” has been set for the parameter
Type of heating valve
or
Type of
cooling valve.
Fig. 32: Parameter window: “Window contact”
Type of EIB window contact
Options: –
no EIB sensor
–
normal
–
inverted
Setting an EIB / KNX window contact.
Type of local window contact
Options:
– no local sensor
–
contact open: window open
– contact closed: window open
–
Input:
normal
–
Input:
inverted
Setting a local window contact or a binary input. The options “contact open:
window open” and “contact closed: window open” are used for a window
contact. In the case of a window contact, the
Controller function for open
window
is executed when the contact is closed or opened. The status is
reported via the EIB (communication object “Window contact – Input for
window contact”).
The options “Input: normal” and “Input: inverted” are used for a binary input.
The status is reported via the EIB (communication object “Window contact
– Input for window contact”). No control is carried out in addition.
4.2.10 Parameter window:
“Window
contact”
Project design and programming
