ABB EVLUNIC PRO M, Configuration Manual, Page: 14 / 37

CHARGING STATION
STATUS
Released
DOCUMENT ID.
TBA
REV.
A
LANG.
EN
PAGE
14/37
© Copyright 2019 ABB. All rights reserved.
Using a router
In a network connection using a router, the router automatically provides the functionality of a DHCP
server in most cases.
Information
If the IP addresses are assigned externally (for example, by routers with
activated DHCP server), the IP addresses must not be in the following range:
192.168.25.xxx
Using a switch
For a network connection using a switch, the master charging station must be configured as a DHCP
server. The IP addresses are then assigned by the master charging station.
2.2.4. Ports for communication in the charging network
For the correct communication in the charging network, the ports below must be enabled network-
internally
Information
If necessary, contact your network administrator to enable the ports.
Port
Protocol Definition Description
49153 TCP Within the network Socket of the charging station
15118 TCP Within the network Link connection between the charg
ing stations (SDP)
15118 UDP Within the network Link connection between the charg-
ing stations (SDP)
68 TCP Within the network Transfer of the software update
(Bootps)
68 UDP Within the network Transfer of the software update
(Bootps)
67 TCP Within the network Transfer of the software update
(Bootps)
67 UDP Within the network Transfer of the software update
(Bootps)