ABB DPA Upscale RI Series, User Manual

Page: 8 / 133

Section-0
04-3006_S0_OPM_ABB_DPA_UPSCALE_RI_10-80kW_EN_150316.doc Page 8/8 ABB
Modifications reserved
0.2 DPA UPSCALE RI SYSTEM DESCRIPTION
In environments that demand zero downtime, continuous power protection availability is essential. In order to
respond to today’s dynamic IT and process
-related environments that experience daily change through new server
technologies, migration and centralization, resilient and easily adaptable power protection concepts are required.
DPA UPScale is the foundation for continuous power protection availability of network-critical infrastructures in
enterprise data centers where business continuity has paramount importance and in process control environment
where manufacturing continuity is essential.
DPA UPScale’s is a
third generation high-power-density (HPD), leading-edge double-conversion power protection
technology that has standardized on a modular component approach which helps speed deployment, improve
adaptability and increase system availability while reducing total cost of ownership.
DPA UPScale’s is a unique on
-demand architecture that integrates the power rack, power distribution unit, back-up
battery rack and monitoring and management solutions to allow easy selection of optimized configurations.
DPA UPScale’s (Distributed Parallel Architecture) provides highes
t availability, unmatched flexibility and at the
same time lowest cost of ownership in IT environments.
This Technical Specification provides detailed technical information on the mechanical, electrical and
environmental performance of the DPA UPScale model types that can support to give answers to tender and end-
user requirements. The DPA UPScale family was designed to respond to the most stringent safety, EMC and other
important UPS standards. DPA UPScale family is offered in two types of solutions:
DPA UPScale RI is a rack independent modular design offering 7-types of Rack Independent Subracks. Those can
accommodate DPA UPScale Rack based Modules for a wide range of power requirements:
DPA UPScale RI (rack independent) Subracks: DPA UPScale Modules types:

DPA UPScale RI 10 (20kW) UPScale M 10 (kW)

DPA UPScale RI 11 (20kW) UPScale M 20 (kW)

DPA UPScale RI 12 (20kW)

DPA UPScale RI 20 (40kW)

DPA UPScale RI 22 (40kW)

DPA UPScale RI 24 (40kW)

DPA UPScale RI 40 (80kW)
Key Features of DPA UPScale RI:

Highest Availability Near-zero down time
Modular, Decentralized Parallel Architecture (DPA)

High Power Density (up to 122kW / m
2
), Space-saving of expensive floor space
Small Footprint

Unity Output Power Factor No de-rating for loads with Unity PF
Full power for loads with unity PF
 Highest Efficiency even with partial loads Energy cost saving during UPS-life-cycle
Efficiency = 94.5 - 95.5% for loads 25-100%
(depending on Module power and type of load)
Very low input current distortion THDi Gen-set power and installation cost saving
THDi = < 3@ 100 % load