ABB CPS6000, Product Manual

Page: 17 / 201

Page 17
© Copyright 2021 ABB. All rights reserved.
Table 2 - B: CPS6000 Physical Specifications
Height in. (mm) Width in. (mm) Depth in. (mm) Weight lb (kg)
Rectifier 3.41 (86.6) 3.4 (86.3) 11.2 (284.5) 5.75 (2.6)
Ringer Chassis 3.41 (86.6) 3.4 (86.3) 11.2 (284.5) 3.45 (1.6)
Ringer 2.4 (61.0) 1.51 (38.4) 9.9 (252) 1.25 (0.6)
19 - Inch Shelf 3.41 (86.6) 17.37 (441.2)
12 (304) - front
access
13.25 (337) - rear
access
7.5 (3.41)
23 - Inch Shelf 3.41 (86.6) 20.95 (532.1)
12 (304) – front
access
13.25 (337) - rear
access
12.7 (5.77)
Single - Slot Distribution Module 3.41 (86.6) 5.1 (129.5) 12 (304) 9 (4.1)
Double - Slot Distribution Module 3.41 (86.6) 8.5 (216) 12 (304) TBM
Bulk Output Module 3.41 (86.6) 1.59 (40.4) 12 (304) 4 (1.8)
23 - Inch Frame Mounting
Requirements
Standard 23 and 26 - inch relay racks:
Vertical mounting centers: 1.0 in. (25 mm) and 1.75 in. (44 mm)
Horizontal mounting centers: 22.32 in. (567 mm)
19 - Inch Frame Mounting
Requirements
Standard 19 - inch relay racks:
Vertical mounting centers: 1.0 in. (25 mm) and 1.75 in. (44 mm)
Horizontal mounting centers: 18.31 in. (465 mm)
Table 2 - C: CPS6000 Shelf Specifications
Control Unit QS840A / QS841A
Nominal Output Voltages 48/52/54.5 V
dc
Operating Voltage Range 42 to 58 V
dc
Maximum Output Current 200A per 19 - inch shelf; 250A per 23 - inch shelf
(see Note 1)
Nominal Input Voltage 100/120/200/208/240 V
ac
Input Voltage Ranges 85 to 275 Vac
Max Nominal Input Current per Rectifier (based on 25A
rectifier for low line ac, and 50A rectifier for high line ac)
13A at 120 V
ac
14.5A at 208 V
ac
Boost Voltage 48 to 58 V
dc
Output Voltage Regulation ±0.5%
Output Noise:
Ripple Wideband Noise
100 mVrms maximum, 10 Hz to 20 MHz
< 250 mV pk - pk over the range dc to 100 MHz
Load Share Accuracy 1.5A (maximum) for QS862A
Maximum Discharge Current (see Note) 227A per 19 - inch shelf; 284A per 23 - inch shelf
Maximum Recharge Current Installed rectifier capacity minus plant load
Low - Voltage Disconnect 39 to 50 V
dc
Low - Voltage Reconnect 39 to 55 V
dc
Heat Dissipation
177W (604 BTU) per QS862A at full load and
120 V
ac
operation; 132W (450 BTU) per QS861A rectifier at full
load and 120 V
ac
operation;