ABB ARM600 User Manual Download Page 7 | Manualshive

Page: 7 / 72

ABB ARM600 User Manual Download Page 7

End user license agreement

This End User License Agreement is a legal agreement between you and ABB for the
Product identified below.

BY INSTALLING, COPYING, OR OTHERWISE USING THE PRODUCT YOU
AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO
NOT AGREE, YOU ARE NOT ENTITLED TO INSTALL OR USE THE
PRODUCT.

1. The product

For the purposes of this agreement, the term “Product” shall mean all software and
related information provided by ABB under this agreement including but not limited
to ABB proprietary module for Arctic Patrol (m2msys, viola-m2mgw-base, viola-
centos-configuration, viola-m2mgw, viola-php-common).

The Product includes computer software and may include a License Key, associated
media printed materials, and online or electronic documentation.

Product software can delivered as such or as a part of hardware product (ARM600).
The form of delivery is agreed between the Parties.

The term “System of Computers” shall mean a system of one or more interconnected
computers on which the Product software is installed and configured such that the
computers cooperate as a system to perform the functions of the Product.

The Product may include software, which is owned by a third party. For such software
separate license terms and conditions may apply which you agree to comply with.

2. Grant of license

ABB grants you the following non-exclusive and restricted rights, provided that you
comply with all the terms and conditions of this agreement.

2.1 Installation and use

You may install and run the Product on one System of Computers, and use, access, and
display the functional options that are specified in the License Certificate, for their
intended use as defined in the product documentation, and within the configuration
and capacity limits that are specified in the License Certificate.

You may not use, access or display functions that are not specified in the License
Certificate.

You may not exceed the configuration and capacity limits that are specified in the
License Certificate.

A License for the Product may not be shared or used concurrently on different Systems
of Computers.

2.2 Storage and network use

«
...
5
6
7
8
9
...
»

Summary of Contents for ARM600









































































Reviews:

No comments