Table 3:
Operating system interface names and physical Ethernet connectors
ARM600 version Eth0 interface
(WAN)
Eth1 interface
(LAN)
Eth2 interface
(spare)
Eth3 interface
(spare)
Standard edition
Gb1 connector
Gb2 connector
N/A
N/A
Enterprise
edition
Ethernet 1
connector
Ethernet 2
connector
Ethernet 3
connector
Ethernet 4
connector
3.1.
Standard edition
: The default firewall configuration expects that the Gb1
port is the WAN port and Gb2 is the LAN port. In factory configuration,
only the Gb1 port is enabled. Insert first the Ethernet cable to the “Gb1”
port. This port is seen in ARM600’s WHMI as the eth0 port.
3.2.
Enterprise edition
: Insert first the Ethernet cable to the port marked with
“1”. This port is seen in ARM600’s WHMI as the eth0 port.
The VGA display and USB keyboard are not needed for configuring ARM600.
They can be used, if a local console access is needed.
4.4
Logging in
1.
Configure the computer to use the same IP address space as the device.
Example: Laptop IP is 10.10.10.11 with netmask 255.255.255.0.
2.
In a Web browser, connect to the ARM600 WHMI on port 10000 using the
HTTPS protocol.
•
https://10.10.10.10:10000
The WHMI uses self-signed certificates. Click the
Add an exception
button to
add a security policy exception or click the
Continue to this Website
text during
login, depending on the browser in use.
3.
Enter the username and password.
Change the default ”arctic-adm" and ”root" user passwords
before connecting ARM600 to public networks.
Section 4
1MRS758861 A
Getting started
18
ARM600
User Manual