ABB Arc Guard System TVOC-2-COM, Configuration Manual

Page: 20 / 40

20 ABB ARC GUARD SYSTEM™ – TVOC-2-COM MODBUS CONFIGUR ATION MANUAL
4.1 Functional description
The information found here is the basic information
needed for the installation of a Modbus system.
4.2 Implementation class
The physical and data link layer are implemented
conforming to the “basic slave” implementation class
as described in document [2] “MODBUS over Serial Line
specification and implementation guide V1.02”.
The following options have been implemented:
Table 2 Modbus Parameters
General settings
Parameter
Options Remarks
Addressing address configurable 1-248 (default 248) When set to 248, the communication is
disabled.
Baud rate 9600
19200 (default)
38400
57600
Parity none
even (default)
odd
Data bits 8 Not configurable.
Stop bits 1 (default)
1.5
2
The use of no parity requires 2 stop bits.
Electrical interface RS485 2W cabling
4.3 Supported Modbus functions
This section describes the supported Modbus function
codes.
4.3.1 Read Registers (03, 04)
Both function 03, Read Holding Registers and function 04,
Read Input Registers, can be used. The addresses are the
same.
Table 3 Read Exceptions
Possible exception responses
Code
Name Meaning
02 ILLEGAL_DATA_ADDRESS Address refers to a register that is not available
or not readable.
04
Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)