ABB Arc Guard System TVOC-2-COM, Configuration Manual

Page: 28 / 40

28 ABB ARC GUARD SYSTEM™ – TVOC-2-COM MODBUS CONFIGUR ATION MANUAL
4.4.6 Dip switches
This registers contains the status of the dip switches on
the Arc Monitor in its least significant byte.
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Dip
switch
- - - - - - - - - - CSU22 CSU21 X3 X2 External
HMI
Internal
HMI
Example:
the value 0x0004 indicates that dip switch 3,
TripMatrix 4, is On and all others are Off.
4.4.7 Version information
Software (SW) and CPLD versions are specified with three
numbers XX.YY.ZZ. Each version is presented using two
Modbus registers, one for the first two numbers and one
for the last.
4.4.7.1
Arc Monitor SW version XXYY
This registers contains the first number of the version in
the most significant byte and the second number of the
version in the least significant byte.
Example: If the Arc Monitor software version is 00.03.43
this register has value 0x0003.
4.4.7.2
Arc Monitor SW version ZZ
This registers contains the third number of the version in
the least significant byte.
Example:
If the Arc Monitor software version is 00.03.43
this register has value 0x002B.
4.4.7.3
Arc Monitor HW version
This register contains the Arc Monitor hardware version in
the least significant byte.
4.4.7.4
Arc Monitor CPLD version XXYY
This registers contains the first number of the version in
the most significant byte and the second number of the
version in the least significant byte.
Example: If the Arc Monitor CPLD version is 00.02.01 this
register has value 0x0002.
4.4.7.5
Arc Monitor CPLD version ZZ
This registers contains the third number of the version in
the least significant byte.
Example:
If the Arc Monitor software version is 00.02.01
this register has value 0x0001.
4.4.7.6
Arc Monitor ID, byte x
The ID number is presented using 5 bytes.
Each register contains one byte in the least significant
byte.
04
Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)