ABB Arc Guard System TVOC-2-COM, Configuration Manual

Page: 29 / 40

ABB ARC GUARD SYSTEM™ – TVOC-2-COM MODBUS CONFIGUR ATION MANUAL 29
The first part of the ID number is static, it is always
“1S16010”.
Then byte 4, 3 and 2 follows in decimal format with 2
digits for each number.
Finally a 16-bit word constructed from byte 1 as most
significant and byte 0 as least significant is added as a 4
digit decimal number (byte 1 << 8 | byte 0).
Example:
If the Arc Monitor ID registers contains the
following values:
Arc Monitor ID, byte 0 0x00D9
Arc Monitor ID, byte 1 0x0007 This corresponds to ID
Arc Monitor ID, byte 2 0x0012 (18) 1S16010 72 14 18 2009
Arc Monitor ID, byte 3 0x000E (14) 0x48 0x0E 0x12 0x07D9
Arc Monitor ID, byte 4 0x0048 (72)
HMI SW version XXYY
The HMI is the HMI that is queried on the Modbus
network.
See 4.4.7.1 Arc Monitor SW version XXYY above.
4.4.7.7
HMI SW version ZZ
See 4.4.7.2 Arc Monitor SW version ZZ above.
4.4.7.8
HMI HW version
See 4.4.7.3 Arc Monitor HW version above.
4.4.7.9
HMI ID, byte x
See 4.4.7.6 Arc Monitor ID, byte x above.
4.4.7.10
Other HMI SW version XXYY
Other HMI is the HMI that is not queried on the Modbus
network.
See 4.4.7.1 Arc Monitor SW version XXYY above.
4.4.7.11
Other HMI SW version ZZ
See 4.4.7.2 Arc Monitor SW version ZZ above.
4.4.7.12
Other HMI HW version
See 4.4.7.3 Arc Monitor HW version above.
4.4.7.13
Other HMI ID, byte x
See 4.4.7.6 Arc Monitor ID, byte x above.
4.4.7.14
X2 HW version
See 4.4.7.3 Arc Monitor HW version above.
4.4.7.15
X2 CPLD version XXYY
See 4.4.7.4 Arc Monitor CPLD version XXYY above.
04
Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)