AP200 series
Rugged pH/Redox (ORP) sensor systems with rapid temperature response for critical processes
3 Electrical Installation
12
IM/AP200 Rev. S
3.3 Extending the Connection Cable
If it is necessary to extend the cable, a suitable junction box and
the correct length of 6-core cable are required. Connect the
junction box as shown in Fig. 3.3.
3.4 Jetwash System Connections
The electrical supply to the jetwash system pump or solenoid
valve is connected to the analyzer relay used for automatic
cleaning – see Fig. 3.4. The analyzer controls the frequency of
the wash sequence and the duration for which the cleaning
solution flows.
The analyzer outputs are held during a cleaning sequence.
Note.
Junction box (part no. 7690/049) is recommended.
6-core cable, part no, 7690054/XX (where XX is the
cable length, from 5 to 50 meters, in 5 meter
increments) is recommended.
Cable 7690054 is identical to that fitted to the sensor.
See Fig. 3.2 for cable end preparation instructions.
Fig. 3.3 Extending the Connection Cable
Cable from AP200 Sensor or
Detachable Cable – see Table 3.1
Extension Cable
(Pt No. 7690054/XX)
to Analyzer
Junction Box
Pt No. 7690/049
Gr
een
Gr
een
White
White
Gr
ey
Gr
ey
Blue
Blue
Gr
een/Y
ellow
Gr
een/Y
ellow
T
ranspar
ent
T
ranspar
ent
Red
Red
Cable Length
Part Number
5 m (16 ft)
7690050
10 m (33 ft)
7690051
15 m (49 ft)
7690052
20 m (60 ft)
7690053
Table 3.1 Detachable Cables
Fig. 3.4 Electrical Connections for Jetwash Systems
N/O
C
Solenoid Valve
OR
Pump
Transmitter
Auto Clean
Relay Contact
