AP200 series
Rugged pH/Redox (ORP) sensor systems with rapid temperature response for critical processes
2 Mechanical Installation
4
IM/AP200 Rev. S
2.1.2 Model AP202 Inline System
This system is supplied with an inline tee-piece for mounting the system directly into a pipeline. Allow sufficient height above the
system to enable the sensor to be withdrawn from the tee-piece.
Dimensions in mm (in.)
Fig. 2.2 Model AP202 Inline System
67.5
(2.66)
Minimum
clearance
required
(Stainless Steel
versions only)
(Polypropylene
versions only)
To prevent spillage
when system
is removed
To ensure electrode
is always in sample
Isolating
Valve
Isolating
Valve
Typical Installation
Rp 1 in.
Female Threads
Note.
Refer to Section 6, page 15 for
information about the different versions.
