ABB ACS880-0500-3, Hardware Manual

Page: 10 / 88

The manual is written for readers worldwide. Both SI and imperial units are shown.
Related manuals
Code Manual
General manuals
3AUA0000102301 ACS880 multidrive cabinets and modules safety instructions
3AUA0000102324 ACS880 multidrive cabinets and modules electrical planning instructions
3AUA0000101764 ACS880 multidrive cabinets mechanical installation instructions
Supply unit manuals
3AUA0000130644 ACS880-207 IGBT supply units hardware manual
3AUA0000131562 ACS880 IGBT supply control program firmware manual
3AUA0000102453 ACS880-307 +A003 diode supply units hardware manual
3AXD50000011408 ACS880-307 +A018 diode supply units hardware manual
3AUA0000103295 ACS880 diode supply control program firmware manual
3AXD50000020546 ACS880-907 regenerative rectifier units hardware manual
3AXD50000020827 ACS880 regenerative rectifier control program firmware manual
Inverter unit manuals
3AUA0000102519 ACS880-107 inverter units hardware manual
3AUA0000085967 ACS880 primary control program firmware manual
3AUA0000098062 ACS880 primary control program quick start-up guide
Manuals for application programs (Crane, Winder, etc.)
Brake unit and DC/DC converter unit manuals
3AUA0000102559 ACS880-607 1-phase brake units hardware manual
3AXD50000022034 ACS880-607 3-phase brake units hardware manual
3AXD50000020967 ACS880 (3-phase) brake control program firmware manual
3AXD50000023644 ACS880-1607 DC/DC converter units hardware manual
3AXD50000024671 ACS880 DC/DC converter control program firmware manual
Option manuals
3AUA0000085685 ACS-AP-x assistant control panels user’s manual
3AUA0000094606 Drive composer start-up and maintenance PC tool user’s manual
Manuals for I/O extension modules, fieldbus adapters, safety options etc.
You can find manuals on the Internet. See www.abb.com/drives/documents . For manuals
not available in the document library, contact your local ABB representative.
Categorization by frame size and option code
Some descriptions, instructions, technical data and dimensional drawings which concern
only certain brake units are marked with the symbol of the frame size such as 4×R8i. The
marking derives from the quantity and basic construction of the brake chopper modules that
form the brake unit. For example, frame size 2×R8i indicates that the brake unit consists of
two frame size R8i brake chopper modules connected in parallel.
The frame size is marked on the type designation labels. The frame size of each brake
chopper module is also shown in the technical data.
10 Introduction to the manual