Instructions
© 2002 • HPC, Inc. • Schiller Park, IL • 60176 • USA • www.hpcworld.com
PIN DEPRESSING SCREW
PIN DEPRESSING SCREW
Lever Handle Remover
No. LHR-100
HPC’s Lever Lock Handle Remover is designed to quickly
remove locked lever handles for servicing. Ideal when picking
the lock is not an option.
1. Choose the proper size Pin Depressing Screw and determine
which end of the Slide Post will allow easiest access to the
lever lock handle retaining-pin and assemble as shown
(see fig. 1).
2. Back off Drive Bolt and Holding Bolts before placing Hub onto
lever lock handle (see fig. 2).
3. Keeping the Hub centered on the handle, tighten the two Holding
Bolts equally to lock Hub onto lever lock handle (see fig. 3).
Do
not over-tighten. Care should be taken so as not to crush the
nylon tips
.
4. Secure the Drive Bolt against the plug (see fig. 4).
5. Line up the Pin Depressing Screw with the lever lock handle
retaining-pin and tighten slowly, depressing the pin. Only depress
the retaining pin enough to clear the thickness of the handle. This
is done to hold the retaining pin in while removing the lever
handle (see fig. 5).
Fig. 1
Fig. 2
020503 35T00-280-00
DRIVE BOLT
HOLDING
BOLTS
TOP VIEW
Fig. 3
Fig. 4
(continued)
Fig. 5
