ABB ACS-AP-I User Manual Download | Manualshive

Page: 23 / 82

background image

￭

Control panel and panel platform/holder LEDs

The ACS-AP-… control panel has a status LED. The control panel mounting platform or
holder has two status LEDs. For their indications, see the following table.

Indication

LED

Location

The unit is functioning normally.

Continuous green

Control panel

Data is transferred between the PC and the unit through the USB
connection of the control panel.

Flickering green

There is an active warning in the unit.

Blinking green

There is an active fault in the unit.

Continuous red

There is a fault that requires the stopping and restarting of the
drive/converter/inverter.

Blinking red

The Bluetooth interface is enabled, in discoverable mode, and
ready for pairing.

Blinking blue (ACS-
AP-W only)

Data is being transferred through the Bluetooth interface of the
control panel.

Flickering blue
(ACS-AP-W only)

There is an active fault in the unit.

Red

Control panel
mounting platform or
holder (with the
control panel
removed)

Power supply for the control unit is OK.

Green

￭

USB connector

The USB connector is used for connecting the control panel to a PC. When connected, the
control panel acts as an USB adapter for data transfer between the PC tool and the drive.
It is also possible to transfer data between the PC and the control panel through the USB
connection.

See chapter

Panel-to-PC USB connection (page 71)

Control panel overview 23

«
...
21
22
23
24
25
...
»

Summary of Contents for ACS-AP-I



















































































Reviews:

No comments

Related manuals for ACS-AP-I

Brand: Jafar Pages: 9

Brand: Magellan Pages: 2

Brand: Paradox Pages: 2

Brand: Paradox Pages: 44

Brand: Watlow Pages: 20

Brand: Fagor Pages: 8

Brand: Bardiani Pages: 22

Brand: A10 Networks Pages: 2

Brand: Z-Wave Pages: 5

8745 MFC Ethernet

Brand: Burkert Pages: 70

Brand: Tempco Pages: 12

Brand: FUHR Pages: 20

TRILOGY T500 Series

Brand: Eclipse Pages: 20

MotorController WCC 310 UL

Brand: Window Master Pages: 39

Brand: adept technology Pages: 96

Sigma II Series

Brand: YASKAWA Pages: 359

Brand: Motroline Pages: 5

Thermo Call TC3

Brand: Webasto Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands