ABB ACS-AP-I User Manual Download

Page: 64 / 82

Type

LED

Display

See

Faults (page 65)

continuous red

Faults of this type require stopping and restarting
the drive before it continues to function normally.

See

Faults (page 65)

blinking red

A fault has occurred in another drive in the panel
bus.

continuous red

See

Warnings (page 65)

blinking green

The connection between the control panel and the
drive is faulty.

continuous green

Check that the connection cable is properly at-
tached.

The control panel type is not compatible with the
drive you attempt to use it with.

continuous green

See

Applicability (page 10)

The connection between the control panel and the
drive has been lost.

continuous green

Check the control panel network connections.

Select another drive.

64 Fault tracing

Summary of Contents for ACS-AP-I


















































































Search results

Summary of Contents for ACS-AP-I

Reviews:

Related manuals for ACS-AP-I

Brands by name

Popular brands

ABB ACS-AP-I, User Manual

Search results

Summary of Contents for ACS-AP-I

Reviews:

Related manuals for ACS-AP-I

Brands by name

Popular brands