ABB ACS-AP-I, User Manual

Page: 10 / 82

Applicability
This manual applies to the following panel types and their versions:
ACH-AP-W ACH-AP-H ACS-AP-W ACS-AP-I and
ACS-AP-S
Control panel type
A or later C or later A or later C or later Hardware version
5.40 or later 5.00 or later 5.01 or later 4.61 or later Software version
You can also view panel details in the panel itself using either of the two methods:
•
With panel still not powered, press and hold (
?
) button, then power up the panel through
USB or drive.
Control panel
Product type: ACS-AP-I
HW version: D
FW version: GPAPI v5.80
or
• With panel powered up, go to Menu → System info → Control panel .
Note: The images and instructions in this manual are examples, each based on a specific
control panel and drive type combination. The details may vary with different control panels
or drive types.
Compatibility
The following drive(s) are compatible with these panel types.
ACH-AP-H,
ACH-AP-W
ACS-AP-W ACS-AP-S ACS-AP-I Control panel
type
ACH480, ACH580,
ACQ580 ACS380, ACS480,
ACS530, ACS560,
ACS580, ACQ580,
ACS860, ACS880 ACS380, ACS480,
ACS530, ACS560,
ACS580 ACS380, ACS480,
ACS530, ACS560,
ACS580, ACQ580,
ACS860, ACS880 Drive
Note: This table may not be comprehensive. See the appropriate drive manual for more
details.
10 Introduction to the manual