ABB ACS-AP-I User Manual Download

Page: 46 / 82

Note:

This functionality is available in a future release.

Select one of the restore options:

•

To restore all settings, select

Restore all parameters

•

To restore a set of parameters, select

Select par restore group

and select the

desired parameters from the list, and then select

Restore

•

To select application parameters, select

Select application items

and select the

desired parameters from the list and then select

Restore

•

To select user parameters sets, select

Select user sets

and select the desired

user set from the list and then select

Restore

•

To select production data items, select

Select prod. data items

and select the

desired production data and then select

Restore

Wait until the restore is completed. An animation is shown on the control panel during
the restoring process.The control panel automatically returns to the

Backups

menu.

System info

In the

System info

menu, you can view information about the drive, control panel, fieldbus

and any installed option modules. You can also generate a QR code that contains the drive
information.

46 Functions in the main Menu

Summary of Contents for ACS-AP-I


















































































Search results

Summary of Contents for ACS-AP-I

Reviews:

Related manuals for ACS-AP-I

Brands by name

Popular brands

ABB ACS-AP-I, User Manual

Search results

Summary of Contents for ACS-AP-I

Reviews:

Related manuals for ACS-AP-I

Brands by name

Popular brands