ABB ACQ810, Hardware Manual

Page: 17 / 134

Introduction to the manual 17
2
Introduction to the manual
What this chapter contains
This chapter describes the intended audience and contents of the manual. It contains a
flowchart of steps in checking the delivery, installing and commissioning the drive. The
flowchart refers to chapters/sections in this manual and to other manuals.
Target audience
This manual is intended for panel builders and system integrators who
•
plan the cabinet assembly of the drive module and install the module into a user-
defined cabinet
•
plan the electrical installation of a drive cabinet
•
make instructions for the end user of the drive concerning the mechanical installation
of the drive cabinet, power and control cabling and maintenance.
Read the manual before working on the drive. You are expected to know the fundamentals
of electricity, wiring, electrical components and electrical schematic symbols.
The manual is written for readers worldwide. Both SI and imperial units are shown.
Contents of the manual
This manual contains the instructions and information for the basic drive module
configuration. The chapters of the manual are briefly described below.
Safety instructions give safety instructions for the installation, commissioning, operation
and maintenance of the drive module.
Introduction to the manual introduces the manual.