ABB ACH-AP-H User Manual Download

Page: 75 / 82

Technical data

What this chapter contains

This chapter contains the technical details of the Assistant control panel.

Connectors

The control panel has the following connectors:

Purpose

Connector

Used for connecting the panel to drive.

RJ-45 female connector

• If cable is used, then maximum length should be 100 meters (328 ft.)
• On a panel bus, the combined maximum length of the panel bus cables

should be 100 meters (328 ft.).

• The panel bus can have a maximum of 32 nodes.

Used for connecting panel to PC. It is intended for temporary service use
(USB 2.0, MTP protocol). The maximum cable length should be three meters
(9.8 ft.).

Type B mini USB connector

Display

The control panel has a monochrome, 240×160 pixel resolution LCD display with adjustable
backlight and display contrast.

See

Basic settings and assistants (page 31)

Battery

At an ambient temperature of 25 °C (77 °F), the change interval of the real-time clock battery
is approximately 10 years.

CR2032

Battery type

Technical data 75

Summary of Contents for ACH-AP-H


















































































Search results

Summary of Contents for ACH-AP-H

Reviews:

Related manuals for ACH-AP-H

Brands by name

Popular brands

ABB ACH-AP-H, User Manual

Search results

Summary of Contents for ACH-AP-H

Reviews:

Related manuals for ACH-AP-H

Brands by name

Popular brands