ABB ACH-AP-H User Manual Download

Page: 60 / 82

The picture shows panel bus example with ACS880-01 drives. The ACX580 and ACX480
drives have dedicated panel bus adapters with two RJ-45 slots.

Selecting drive menu

In the

Options

menu, select

Select drive

which lists all the drives connected to the panel

bus and shows their current status. If panel bus is not enabled, only one drive is shown.

In the panel bus, If the connection to the currently selected drive fails,

Select drive

is shown with the other drive list.

In the

Select drive

menu, any drives to which the connection is lost are shown in dimmed

text.

￭

Selecting a drive

If there are multiple drives connected to the same panel bus, you can select which drive to
control with the control panel.

In the

Options

menu, select

Select drive

to open a list of connected drives.

Use

and

to move the cursor. When a drive is highlighted, the green LED on the

drive blinks for one second.

Press

(

Select

) to change control to the highlighted drive.

60 Control of multiple drives

Summary of Contents for ACH-AP-H


















































































Search results

Summary of Contents for ACH-AP-H

Reviews:

Related manuals for ACH-AP-H

Brands by name

Popular brands

ABB ACH-AP-H, User Manual

Search results

Summary of Contents for ACH-AP-H

Reviews:

Related manuals for ACH-AP-H

Brands by name

Popular brands