ABB Ability Naveo Pro GW 1.0, Operation Manual

Page: 31 / 36

31 M A I N T EN A N C E
10.1 How to maintain the product
Periodically inspect the product to verify its integrity and to ensure proper operation. To maintain the
product, complete the following steps:
1. Carefully read and understand the instructions contained in the section "Safety Instructions" on
page 8
2. Safely remove the power supply
3. Verify the installation of the product
4. Clean the product
10.2 How to safely remove the power supply
10.3 How to verify the installation of the product
To verify the installation of the product, complete the following steps:
1. Verify that the product is clean and not damaged
2. Verify that the LED indicators are visible and not damaged
3. Verify that all the locking parts (for example: screws, bolts, nuts) are correctly fastened
10.4 How to clean the product
To clean the product, complete the following steps:
1. Never use detergents, aerosol sprays, solvents or abrasive sponges
2. To remove dust from the case of the product, use a dry, lint-free, cloth
3. To remove the dirt, use water-based, non-flammable, cleaner products.
—
10 Maintenance
WARNING
ELECTRIC SHOCK HAZARD
Failure to supply power correctly or to follow all operating instructions correctly, may create an electric
shock hazard, which could result in personal injury or loss of life, and / or damage the equipment or
other property.
To avoid injuries and safely supply power to the product, complete the following steps:
1. Make sure your hands are dry
2. Turn OFF all the power supply sources
3. Disconnect all the cables