ABB Ability Naveo Pro GW 1.0, Operation Manual

Page: 29 / 36

29 P O W ER
—
9 Power
9.1 How to supply power to the product
This product is not provided with any ON/OFF switch.
In order to disconnect the power, please simply remove the power supply connector from the Gateway.
9.2 Power supply specifications
9.2.1 Power IN connector and mating connector specifications
The power input is protected against: surge, noise, reverse polarity, over-voltage
The Naveo®Pro Gateway provides the Power IN connector on the rear side.
Power supply Nominal: 12 or 24 VDC; Range: 9 to 30 VDC with transient protection
Power consumption 4 W typical; 15 W maximum
Peak demand < 15 W
NOTICE
The Power IN connector is NOT protected against short circuit.
Always include an external fuse to protect the product!
Connector Specifications:
•
Base strip, Header
• Gender: Male
• Type: 3-pin, 3.5 mm pitch
Mating Connector Specifications:
•
Pluggable screw terminal block
• Gender: Female
• Type: 3-pin, 3.5 mm pitch
• Example:Part Number: MC 1,5/
3-STF-3,5 - 1847068 (or
equivalent)
Pin Signal Type Description
1 Power IN + P Positive power supply input (LIVE)
2 Power IN - P Negative power supply input (NEUTRAL)
3 NC NC Not Connected
1 2 3