ABB A43, User Manual

Page: 41 / 295

Meter Settings
2CMC48001M0201
41 A43/A44
Revision: C User Manual
Step M-Bus EQ-Bus
7
Press once to get to the next Press once to get to the next
menu. The display will show the menu. The display will show the
Send status info. See
Table 4:5
for Inac. TO. See
Table 4:5
for options.
options. Set the send info status. Set Inac. TO.
Press once to get to the next Press once to get to the next
menu. The display will show if the menu. The display will show pass-
password is to be reset. See word reset option. Set if the pass-
Table 4:5
for options. Set the op- word shall be reset or not.
tion.
Press once to get to the next
menu. The display will show the
upgrade mode. See
Table 4:5
for
options. Set the upgrade mode.
Protocol details
The following table shows the intervals and options for the different protocols:
Table: 4:5
Protocol Access Upgrade Send Reset Parity Baudrate Address Inter Inactivity
level Mode Status password octet timeout
Info timeout (ms)
(ms)
EQ-Bus - - - Yes, No - 1200, 16-16381 20-6000 0-2000
(when 2400,
used 4800,
through 9600,
RS-485) 19200,
38400,
57600,
115200,
125000,
230400,
250000,
460800
Modbus - - - - None, 1200, 1-247 - -
(when Odd, 2400,
used Even 4800,
through 9600,
RS-485) 19200,
38400,
57600,
115200
M-Bus Open, Active, Always, Yes, No - 2400, 1-250 - -
(when Password, Not Active Never, 4800,
used Closed When 9600,
through not OK 19200
IR-Side)