![background image](http://html.mh-extra.com/html/abb/a170-m66/a170-m66_operation-manual_3437020.webp)
Operation Manual / A170-M.. - A175-M..
2 Safety / 2.9 Turbocharger rating plate
© Copyright 2021 ABB. All rights reserved.
HZTL4033_EN
Rev.H
July 2021
Explanations regarding the rating plate
The recommended replacement intervals and the corresponding operating limits are jointly
defined with the enginebuilder. This information is specific to the system.
Operation above the indicated values n
Bmax
, t
Bmax
can considerably shorten the recommended
replacement intervals. In such cases ABB recommends contacting the nearest ABB Tur-
bocharging Service Station.
n
Mmax
, t
Mmax
normally apply only when running at overload (110%) during trials on the engine
test bed. These limit values can also be permitted during operation for special applications.
Operation above n
Mmax
and t
Mmax
is not permitted.
Non-observance of the recommended replacement intervals increases the risk of unpredict-
able component failures.
Locations of the rating plates
Fig. 8: Locations of the rating plates
One rating plate (01) each is attached on the left and the right side of the foot of the tur-
bocharger.
On turbochargers with insulation supplied by ABB, at least one additional rating plate is at-
tached to the insulation of the gas outlet casing.
Page
18
/
147