![background image](http://html.mh-extra.com/html/abb/a170-m66/a170-m66_operation-manual_3437083.webp)
Operation Manual / A170-M.. - A175-M..
9 Disassembly and assembly / 9.4 Axial clearance A prior to disas-
sembly
© Copyright 2021 ABB. All rights reserved.
HZTL4033_EN
Rev.H
July 2021
9.4
Axial clearance A prior to disassembly
WARNING
Physical hazards due to sharp edges on compressor wheel
The compressor wheel has sharp edges which can result in injury.
u
Wear safety gloves.
Wear safety gloves to protect against mechanical hazards.
The axial clearance (A) must be measured prior to removal and after installation of the cart-
ridge group.
CAUTION
Clearances outside the tolerance
Serious damage to engines or property can be caused by clearances outside
the tolerance and excessively worn parts.
u
Have the components assessed and, if necessary, replaced by an ABB Tur-
bocharging Service Station.
Fig. 36: Axial clearance
Product
Axial clearance A [mm]
A170-M
0.30 ... 0.61
A175-M
0.35 ... 0.69
Table 36: Axial clearance A
u
Measure and note axial clearance (A).
Page
81
/
147