IEC12000178 V1 EN
Figure 26:
Hardware tool view of the IED
Inserting an IED from the template library
An IED in the plant structure can be exported as a template (*.pcmt). The user can
build up a template library with all the exported IED templates. It is possible to
insert an IED from the template library to create a new IED in the plant structure.
Change the IP address, the name and the technical key that corresponds to the
physical IED after a template IED has been imported.
A template IED can only be inserted when the bay is selected in the
plant structure.
Procedure to insert a template IED
1. Right-click the
Bay
in the plant structure.
2. Select
New
and
Create from Template ...
to open the
Create New Object from
Template
1MRK 511 261-UEN -
Section 4
Setting up a project
650 series
43
Engineering Manual
