Be sure that the IED object in PCM600 has the same IP address as
the physical IED, which is intended to be connected through the
technical key concept.
The technical key for an IED object in PCM600 can also be
changed in the
Object properties
window.
1.
Select the
IED
in the
Plant Structure
.
2.
Right-click and select
Set Technical Key
, see
.
IEC09000667-2-en.vsd
IEC09000667 V2 EN
Figure 6:
PCM600: Set technical key menu at IED level
A dialog window opens to inform about the technical key concept.
3.
Click
OK
in the dialog window.
The technical key is read from the IED and the technical key editor window
opens, see
1MRK 511 261-UEN -
Section 4
Setting up a project
650 series
25
Engineering Manual
