This menu allows you to monitor diagnostics messages related
to pressure variable, output current, output percentage, scaled
output, static and sensor pressure. The menu driven structure
will also guide you through the loop test (set 4 and 20 mA and
set the output value).
This menu gives you all information about the device. The
menu driven structure will show you what is the sensor type,
the hardware and software revisions, the high and low sensor
limits as well as the minimum applicable span.
The last section of this structured and driven menu gives you
the possibility of changing the communication tag and the
MULTI-DROP mode with HART address numbers of the device.
This menu allows the set-up of different functions relevant to
the display itself. The menu driven structure will guide you
through the choice of some functional aspects as the display
language and contrast. Moreover, it is possible to choose in
details what you want to see on the display: one or two lines
with or without bargraph. Inside this menu there is the
possibility of setting a protection password (security) and the
display scaling (linearization type, unit, LRV, URV). Display
revision number available.
This menu allows the parameterization of the process alarm.
The menu driven structure will guide you through the choice of
the fail safe functions such as the saturation limits, the fail level
(upscale or downscale) and the fails safe type which is set as
software at the factory. Software fail safe type means that fail
direction can be set via DD, DD/FDI or display. If hardware is
selected, the software settings are disabled and user has to
use the dip switches on the electronic board.
This menu allows the local calibration of the instrument. The
menu driven structure will guide you through the choice of
pressure sensor trimming (low or high), the output setting (set
to 4 or 20 mA) and at the end you can reset these parameters
(to factory sensor trimming, to user sensor trimming or to
factory output trimming).
28
2 6 6 DDS H A RT |
P R E SSU R E T R A N SM I T T ER S | O I/ 2 6 6 D DS - EN R E V. B
Summary of Contents for 266 DDS
