Abarth 2014 500 Owner'S Manual Download Page 33

Page: 33 / 211

SYSTEM SERVICING

In winter, the climate control system
must be turned on at least once a
month for about 10 minutes.

Have the system inspected at an
Abarth Dealership before the summer.

HEATED REAR WINDOW
DEMISTING/DEFROSTING

Press button

to activate: when this

function is activated, the button LED
switches on.

This function is timed and it will turn off
automatically after about 20 minutes.
Press the

button again to switch

the function off in advance.

IMPORTANT Do not apply stickers on
the inside of the rear window over
the heating filaments to avoid damage.

IMPORTANT

2) The system uses R134a coolant

which does not pollute the
environment in the event of
accidental leakage. Never use R12
fluid which is not compatible
with the system components.

Summary of Contents for 2014 500




















































































































































































































Search results

Summary of Contents for 2014 500

Reviews:

Related manuals for 2014 500

Brands by name

Popular brands

Abarth 2014 500, Owner'S Manual

Search results

Summary of Contents for 2014 500

Reviews:

Related manuals for 2014 500

Brands by name

Popular brands