Abarth 2014 500, Owner'S Manual

Page: 143 / 211

SIDE LIGHTS/DAYTIME
RUNNING LIGHTS
To change the bulb, proceed as follows:
❒
remove the protective rubber cap
mentioned above;
❒
turn the bulb holder B fig. 105
anticlockwise and remove it;
❒
remove the pressure-fitted bulb and
replace it;
❒
refit the bulb holder B by turning it
clockwise and locking it correctly;
❒
refit the rubber cap.
FOG LIGHTS
(for versions/markets, where provided)
For replacing these bulbs, contact
an Abarth Dealership.
REAR LIGHT CLUSTERS
To replace the bulb proceed as follows:
❒
open the tailgate;
❒
unscrew the two fastening screws A
fig. 106 and extract the light cluster
axially without rotating it;
❒
remove the bulb holder from its
housing releasing it from the locking
tabs B fig. 107;
❒
extract the bulbs by pushing them
slightly and turning them
anticlockwise.
The bulbs are arranged as follows fig.
108:
C : direction indicators;
D : brake lights;
E : side lights;
F : reversing light (right light)/rear fog
light (left light).
THIRD BRAKE LIGHTS
To replace the bulb proceed as follows:
❒
remove the two guard caps and
unscrew the two fastening screws A
fig. 109;
❒
remove the assembly;
106
AB0A0094
107
AB0A0095
108
AB0A0096
139